Admiral Turntables | Drive Belts and Idler Wheels

Turntable Tuneup has everything you need to bring your Admiral turntable up to speed and tuned up properly.  We also have a wide selection of turntable accessories like cartridge alignment tools, stylus force gauges, record brushes, silicone damping fluid and more.  Some of these items can be seen at the bottom of this page, or follow the menu bar for the complete selection.

Replacing the drive belt is usually all you need to do to restore proper speed and speed stability to your turntable.  Old belts will stretch out, wear and lose friction, resulting in slow speed, and noticeable wow and flutter during playback.  Unstable platter speed can also harm sound quality even when you can’t hear a noticeable variation in pitch.  Replacing the belt is easy; just remove the platter, and the new belt will fit snugly around the flange on its underside.  Then put the platter back in place and turn it until the motor spindle is visible through one of the holes in the platter.  Then, use a paperclip to pull the belt over the motor spindle, and you’re done!

Removing an idler wheel should be a very straightforward matter of pulling up on the hub of the disk while holding back against the spindle or its frame, though some are held in place with clips that are easily removed with a flat screwdriver. Visit the Idler Wheel Page for more information.

If your turntable is not listed, then it’s easy to determine the correct size of your belt by measuring the circumference of the original belt and deducting 3 to 5 percent.  If the original belt is missing or broken, you can measure the circumference of the belt drive flange on the underside of the platter, and deduct 2 to 3 percent.  All belt model numbers include the circumference in inches.  We have a few hundred different belt models in stock: flat, square cut and round o-rings.


Admiral 4ST-6033

Platter Drive Belt: Flat Medium Belt, Model FM 9.7.  Circumference: 9.7 Inches (246 mm).  Width: 0.187 inches (3/16 in) (5 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

9.7 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 9.7
Click on Photo for Larger Version.

Platter Drive Belt
FM 9.7 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 4ST-6055

Platter Drive Belt: Flat Medium Belt, Model FM 9.7.  Circumference: 9.7 Inches (246 mm).  Width: 0.187 inches (3/16 in) (5 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

9.7 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 9.7
Click on Photo for Larger Version.

Platter Drive Belt
FM 9.7 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 4ST-6066

Platter Drive Belt: Flat Medium Belt, Model FM 9.7.  Circumference: 9.7 Inches (246 mm).  Width: 0.187 inches (3/16 in) (5 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

9.7 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 9.7
Click on Photo for Larger Version.

Platter Drive Belt
FM 9.7 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 5L-5561

Platter Drive Belt: Flat Medium Belt, Model FM 11.3.  Circumference: 11.3 Inches (287 mm).  Width: 0.200 inches (3/16 in) (5 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

11.3 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 11.3
Click on Photo for Larger Version.

Platter Drive Belt
FM 11.3 $10.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 5L-5565

Platter Drive Belt: Flat Medium Belt, Model FM 11.3.  Circumference: 11.3 Inches (287 mm).  Width: 0.200 inches (3/16 in) (5 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

11.3 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 11.3
Click on Photo for Larger Version.

Platter Drive Belt
FM 11.3 $10.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 5L-5568

Platter Drive Belt: Flat Medium Belt, Model FM 11.3.  Circumference: 11.3 Inches (287 mm).  Width: 0.200 inches (3/16 in) (5 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

11.3 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 11.3
Click on Photo for Larger Version.

Platter Drive Belt
FM 11.3 $10.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 6SR-6056

Platter Drive Belt: Flat Medium Belt, Model FM 9.7.  Circumference: 9.7 Inches (246 mm).  Width: 0.187 inches (3/16 in) (5 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

9.7 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 9.7
Click on Photo for Larger Version.

Platter Drive Belt
FM 9.7 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral All 7F’s

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral All 7F’s

Platter Drive Belt: Flat Wide Belt (thick), Model FRM 2.2.  Circumference: 2.2 Inches (56 mm).  Width: 0.250 inches (1/4 in) (6.35 mm).  Thickness: 0.062 in (1/16 in) (1.6 mm).

Flat Turntable Drive Belt, Circumference: 2.2 Inches; Width: 0.250 Inches; Thickness: 0.062 Inches.
Turntable Drive Belt FRM 2.2
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.2 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral All 7Fs

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral All 7Fs

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 98A15-47

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 98B15-47

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 98B15-73

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 98B15-104

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 98B15-121

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 98B15-145

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 98C15-59

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 98C15-107

Platter Drive Belt: Flat Wide Belt (thick), Model FRM 2.2.  Circumference: 2.2 Inches (56 mm).  Width: 0.250 inches (1/4 in) (6.35 mm).  Thickness: 0.062 in (1/16 in) (1.6 mm).

Flat Turntable Drive Belt, Circumference: 2.2 Inches; Width: 0.250 Inches; Thickness: 0.062 Inches.
Turntable Drive Belt FRM 2.2
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.2 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 700-A858-273

Platter Drive Belt: Flat Medium Belt, Model FM 11.3.  Circumference: 11.3 Inches (287 mm).  Width: 0.200 inches (3/16 in) (5 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

11.3 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 11.3
Click on Photo for Larger Version.

Platter Drive Belt
FM 11.3 $10.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 700-A1200-406

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 1959 Stereo

Platter Drive Belt: Flat Wide Belt (thick), Model FRM 2.2.  Circumference: 2.2 Inches (56 mm).  Width: 0.250 inches (1/4 in) (6.35 mm).  Thickness: 0.062 in (1/16 in) (1.6 mm).

Flat Turntable Drive Belt, Circumference: 2.2 Inches; Width: 0.250 Inches; Thickness: 0.062 Inches.
Turntable Drive Belt FRM 2.2
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.2 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 4500

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral 45000

Platter Drive Belt: Flat Medium Belt, Model FM 7.7.  Circumference: 7.7 Inches (197 mm).  Width: 0.188 inches (3/16 in) (5 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

Flat Turntable Drive Belt, Circumference: 7.7 Inches; Width: 0.188 Inches; Thickness: 0.031 Inches.
Turntable Drive Belt FM 7.7
Click on Photo for Larger Version.

Platter Drive Belt
FM 7.7 $5.00






Admiral 45000

This turntable is driven by an idler wheel, which can be rebuilt. Turnaround time is about four weeks. Send in your original idler wheel for service. Rubber Rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral AP-2100

Platter Drive Belt: Flat Medium Belt, Model FM 27.2.  Circumference: 27.2 Inches (691 mm).  Width: 0.200 inches (3/16 in) (5 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

27.2 Inch Flat Turntable Drive Belt
Turntable Drive Belt FM 27.2
Click on Photo for Larger Version.

Platter Drive Belt
FM 27.2 $10.00






Admiral A2400-001

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral A2400-001

Platter Drive Belt: Flat Wide Belt (thick), Model FRM 2.2.  Circumference: 2.2 Inches (56 mm).  Width: 0.250 inches (1/4 in) (6.35 mm).  Thickness: 0.062 in (1/16 in) (1.6 mm).

Flat Turntable Drive Belt, Circumference: 2.2 Inches; Width: 0.250 Inches; Thickness: 0.062 Inches.
Turntable Drive Belt FRM 2.2
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.2 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral A2400-001

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral H-18D

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral H-18D

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral H-18D

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral I/B/C/D

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral KS-71

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral KS-78

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral KS-481M

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral KS-488M

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral KS-693

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-60A

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-60A

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-60A

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-61/A

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-61/A

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-61/A

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-70/A

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-70/A

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-108

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-108

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-108

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-150

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-150

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-150

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-181

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-181

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-181

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-200

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-200

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-200

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-210

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-210

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-211

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-211

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-212

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-212

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-220

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-220

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-221

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-221

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-222

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-222

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-274

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-274

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-274

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-300

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-300

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-300

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-322

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-322

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-500

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-500

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-550

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-550

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-600

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-600

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-604

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-607

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-607-1A

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-607-1B

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-607-4A

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-607-6A

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-624

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-637

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-637-1/B/E

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-637-2/A/B

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-638-2B

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-647

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-647-2D

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-647-3B/C/F

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-674

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-684

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-950

Platter Drive Belt: Flat Wide Belt, Model FRM 2.0.  Circumference: 2.0 Inches (51 mm).  Width: 0.315 inches (5/16 in) (8 mm).  Thickness: 0.023 in (3/128 in) (0.6 mm).

Flat Turntable Drive Belt, Circumference: 2.0 Inches; Width: 0.315 Inches; Thickness: 0.023 Inches.
Turntable Drive Belt FRM 2.0
Click on Photo for Larger Version.

Platter Drive Belt
FRM 2.0 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-950

Platter Drive Belt: Flat Narrow Belt, Model FRZ 2.6.  Circumference: 2.6 Inches (66 mm).  Width: 0.120 inches (1/8 in) (3 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

2.6 Inch Flat Turntable Drive Belt
Turntable Drive Belt FRZ 2.6
Click on Photo for Larger Version.

Platter Drive Belt
FRZ 2.6 $5.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral RC-950

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral STC-1561M

Platter Drive Belt: Flat Medium Belt, Model FRM 10.5.  Circumference: 10.5 Inches (267 mm).  Width: 0.210 inches (7/32 in) (5 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

Flat Turntable Drive Belt, Circumference: 10.5 Inches; Width: 0.210 Inches; Thickness: 0.031 Inches.
Turntable Drive Belt FRM 10.5
Click on Photo for Larger Version.

Platter Drive Belt
FRM 10.5 $10.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral STC-1571

Platter Drive Belt: Flat Medium Belt, Model FRM 10.5.  Circumference: 10.5 Inches (267 mm).  Width: 0.210 inches (7/32 in) (5 mm).  Thickness: 0.031 in (1/32 in) (0.8 mm).

Flat Turntable Drive Belt, Circumference: 10.5 Inches; Width: 0.210 Inches; Thickness: 0.031 Inches.
Turntable Drive Belt FRM 10.5
Click on Photo for Larger Version.

Platter Drive Belt
FRM 10.5 $10.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral STC-1571

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Admiral STC-1600

This turntable is driven by an idler wheel, which can be rebuilt. Send in your original idler wheel for service. Turnaround time is about four weeks. The rubber rim is replaced with new material and re-shaped. Does not include bronze hub re-machining.  Click Here for more information on our idler wheel rebuilding service.

Single Disk Idler Wheel
Single Disk Idler Wheel
Click On Image For Larger Version

Single Disk Idler Wheel Rebuilding Service $40.00


options




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Silicone Damping Fluid for Tonearm Cueing Mechanisms.

If the needle drops more quickly than you’d like when you drop the lever that raises and lowers the tonearm, then the damping fluid in the mechanism’s cylinder needs to be cleaned out and replaced.  Disassembly is straightforward: remove the tonearm rest, and then the cap on top of the cylinder.  Then you can pull the piston straight out, clean out the cylinder with a cotton swab, and add fresh fluid in small increments until original and proper operation is restored.  This thick damping fluid comes in a 10 cc syringe for easy application, and is a sufficient quantity to service several turntables.  It comes with complete instructions.  We have five different thicknesses of silicone in stock, to service monopivot damping wells and tonearm motion damping troughs.  Go to the silicone page for more options and information.

Tonearm Cueing Mechanism
Tonearm Cueing Mechanism

Cueing mechanism with cap removed from cylinder
Cueing mechanism with cap removed from cylinder
 Silicone300K

Silicone Damping Fluid 300,000 cSt, 10cc. $10.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Phono Cartridge Alignment Tool for 12 Inch Records.

This is essential for installing new cartridges and needles, or checking the setup of your old cartridge is aligned correctly.  Go the the Cartridge Alignment Page for more details and options. We have alignment tools for 7, 10, 12 and 16 inch records, in both Baerwald and Löfgren-B geometries.

 cropped-12inchalign-5.png

Phono Cartridge Alignment Tool for 12 Inch Records $20.00


Spindle Size




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Phono Cartridge Alignment Tool for 7 Inch Records.

For collectors of 45 RPM Singles, it is best to have an extra headshell and cartridge that are set up for the different effective length and offset angle requirements of the narrow playing band of 7 inch records.  Playing a 7 inch record on a turntable aligned for 7 inch instead of 12 inch records will bring down the maximum angular error and the average angular error by a ratio of more than 6 to 1.

 7inchalign-4

Phono Cartridge Alignment Tool for 7 Inch Records $20.00


Spindle Size




Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Stylus Force Gauge.

If your tonearm does not have a dial indicator on the counterweight for setting the tracking force (usually 1.5 grams), this handy stylus force gauge is essential for running your cartridge at the correct tracking weight.  Designed, manufactured and hand-calibrated in the USA, this force gauge is super-easy to use.  Just place the stylus inside the laser-etched line for the tracking force you desire.  The gauge has two small nubs on the bottom on which it pivots.  If the tracking force is too light, the far side will remain down.  If it’s too heavy, the stylus side of the gauge will bottom out.  If the stylus force is correct, the gauge will balance evenly on the two nubs.  It has etched lines for 1.0, 1.25, 1.5, 2, 2.5, 3, 3.5, 4, 4.5 and 5 grams.

 forcegauge1  forcegauge3
 forcegauge2

Stylus Force Gauge $15.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express


Carbon Fiber Record Brush.

A basic part of any record collector’s kit.  This brush has more than a million tiny conductive carbon fiber bristles which reach deep into the record grooves and cling to tiny dust particles.  Static charges hold the dust onto the bristles until they are swept off of the record; the brush can be cleaned off by rotating it in the frame; there is a tiny rib in the frame which will knock the dust off.  Do not touch the bristles with your fingers or use the brush in combination with any liquids.  The static cling which attracts dust to the brush works best when your body is electrically grounded; you should touch one hand to the turntable deckplate while using the other hand to sweep off the dust.  More cleaning supplies, including record cleaning fluid and cloths, and stylus cleaning kits, are available on the Cleaning Supplies Page.

Carbon Fiber Record Brush
Carbon Fiber Record Brush

Carbon Fiber Record Brush $12.00





Shopping Cart Supports Paypal, Visa, MasterCard, and American Express